Using electrical resistivity tomography to assess the effectiveness of managed aquifer recharge in a salinized coastal aquifer
Impacte
Scholar |
Altres documents de l'autoria: García-Menéndez, Olga; Ballesteros, Bruno J.; Renau-Pruñonosa, Arianna; Morell, Ignacio; Mochales, Tania; Ibarra, Pedro; Rubio, Félix M.
Metadades
Mostra el registre complet de l'elementcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/33596
comunitat-uji-handle3:10234/33597
comunitat-uji-handle4:
INVESTIGACIONAquest recurs és restringit
https://doi.org/10.1007/s10661-017-6446-9 |
Metadades
Títol
Using electrical resistivity tomography to assess the effectiveness of managed aquifer recharge in a salinized coastal aquiferAutoria
Data de publicació
2018-02Editor
SpringerCita bibliogràfica
GARCÍA MENÉNDEZ, Olga; BALLESTEROS, Bruno J.; RENAU PRUÑONOSA, Arianna; MORELL EVANGELISTA, Ignacio; MOCHALES, Tania; IBARRA, Pedro; RUBIO, Félix M. (2018).Using electrical resistivity tomography to assess the effectiveness of managed aquifer recharge in a salinized coastal aquifer. Environmental Monitoring and Assessment, v. 190, n. 100, p. 1-19Tipus de document
info:eu-repo/semantics/articleVersió de l'editorial
https://link.springer.com/article/10.1007/s10661-017-6446-9Versió
info:eu-repo/semantics/publishedVersionParaules clau / Matèries
Resum
Over 40 years, the detrital aquifer of the Plana de Castellón (Spanish Mediterranean coast) has been subjected to seawater intrusion because of long dry periods combined with intensive groundwater exploitation. Against ... [+]
Over 40 years, the detrital aquifer of the Plana de Castellón (Spanish Mediterranean coast) has been subjected to seawater intrusion because of long dry periods combined with intensive groundwater exploitation. Against this backdrop, a managed artificial recharge (MAR) scheme was implemented to improve the groundwater quality. The large difference between the electrical conductivity (EC) of the ambient groundwater (brackish water due to marine intrusion) and the recharge water (freshwater) meant that there was a strong contrast between the resistivities of the brackish water saturated zone and the freshwater saturated zone. Electrical resistivity tomography (ERT) can be used for surveying similar settings to evaluate the effectiveness of artificial recharge schemes. By integrating geophysical data with lithological information, EC logs from boreholes, and hydrochemical data, we can interpret electrical resistivity (ER) with groundwater EC values and so identify freshwater saturated zones. Using this approach, ERT images provided a high-resolution spatial characterization and an accurate picture of the shape and extent of the recharge plume of the MAR site. After 5 months of injection, a freshwater plume with an EC of 400–600 μS/cm had formed that extended 400 m in the W-E direction, 250 m in the N-S direction, and to a depth of 40 m below piezometric level. This study also provides correlations between ER values with different lithologies and groundwater EC values that can be used to support other studies. [-]
Publicat a
Environmental Monitoring and Assessment February (2018), v. 190, n. 100Drets d'accés
http://rightsstatements.org/vocab/CNE/1.0/
info:eu-repo/semantics/restrictedAccess
info:eu-repo/semantics/restrictedAccess
Apareix a les col.leccions
- IUPA_Articles [306]