CFD modeling of a fixed-bed biofilm reactor coupling hydrodynamics and biokinetics
Impacto
Scholar |
Otros documentos de la autoría: Prades Martell, Lledó; Dorado, A. D.; Climent, Javier; Guimerà, Xavier; chiva, sergio; Gamisans, Xavier
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7035
comunitat-uji-handle3:10234/8617
comunitat-uji-handle4:
INVESTIGACIONEste recurso está restringido
https://doi.org/10.1016/j.cej.2016.12.107 |
Metadatos
Título
CFD modeling of a fixed-bed biofilm reactor coupling hydrodynamics and biokineticsAutoría
Fecha de publicación
2017-04-01Editor
ElsevierISSN
1385-8947Cita bibliográfica
PRADES, L., et al. CFD modeling of a fixed-bed biofilm reactor coupling hydrodynamics and biokinetics. Chemical Engineering Journal, 2017, vol. 313, p. 680-692.Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
http://www.sciencedirect.com/science/article/pii/S1385894716318782Versión
info:eu-repo/semantics/publishedVersionPalabras clave / Materias
Resumen
Rigorous modeling of transport phenomena is essential to reproduce accurately biofiltration systems performance. In this sense, the aim of this study was to investigate the effect of integrating fluid flow dynamics ... [+]
Rigorous modeling of transport phenomena is essential to reproduce accurately biofiltration systems performance. In this sense, the aim of this study was to investigate the effect of integrating fluid flow dynamics in the development of these bioreactor models, mimicking their hydrodynamics and behavior in a fixed biofilm reactor. 2D bioreactor models were developed using three, different well-established tools for modeling bioreactors (AQUASIM, MATLAB, and Computational Fluid Dynamics - CFD), considering from ideal flow patterns to more complex fluid dynamics. A detailed comparison was performed among the results, taking into account the simulation of dissolved oxygen profiles in the liquid phase, inside the biofilm and in the boundary layer along a bioreactor. These models were validated by comparing the simulations with direct measurements obtained by means of dissolved oxygen microsensors of high spatial resolution. In all cases, deviations were below 6%, nevertheless CFD predictions obtained the lowest deviations below 3.5%. Thus, these results underline that CFD techniques are appropriate to model more accurately the performance of fixed-bed biofilm reactors, allowing the study in detail of all the hydrodynamics variables involved in the process. In addition, a 3D CFD model, combining hydrodynamics and biological reactions, was developed and solved to simulate local transient flow and dynamic behaviors of oxygen consumption in the bioreactor. The results of CFD simulations were evaluated in order to know the effect of mass transport phenomena (advection and diffusion) by characterizing hydrodynamics and, finally, to predict the oxygen degradation along the bioreactor. (C) 2016 Elsevier B.V. All rights reserved. [-]
Publicado en
Chemical Engineering Journal, 2017, vol. 313, p. 680-692.Proyecto de investigación
Ministerio de Economia y Competitividad (Spain) / CTQ2015-69802-C2-2-R; Ministerio de Economia y Competitividad (Spain) / ENE2013-48565-C2-2-PDerechos de acceso
Copyright © Elsevier B.V.
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/restrictedAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/restrictedAccess
Aparece en las colecciones
- EMC_Articles [807]