Shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. Proposed structural model.
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: José Luis, Amorós Albaro; Blasco Roca, Encarna; Beltrán Porcar, Vicente
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7033
comunitat-uji-handle3:10234/8618
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. Proposed structural model.Fecha de publicación
2015-09xmlui.dri2xhtml.METS-1.0.item-edition
PostprintEditor
ElsevierCita bibliográfica
AMORÓS ALBARO, José Luis; BLASCO ROCA, Encarna; BELTRÁN PORCAR, Vicente. Shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. Proposed structural model. Applied Clay Science (2015), v. 114, pp. 297-302Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
http://www.sciencedirect.com/science/article/pii/S0169131715002239?np=yVersión
info:eu-repo/semantics/acceptedVersionPalabras clave / Materias
Resumen
A structural model was developed to describe the shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. The model is based on the following main assumptions: the particles are distributed ... [+]
A structural model was developed to describe the shear-thinning behaviour of dense, stabilised suspensions of plate-like particles. The model is based on the following main assumptions: the particles are distributed in more or less compact layers, oriented parallel to the flow; the particles are assumed to behave as hard disks, disk thickness being the sum of crystal thickness plus twice the Debye length; when the shear stress increases, the orientation of the plate-like particles in the flow direction also increases, thus increasing layer compactness. In order to test the proposed model, a kaolin was selected and characterised. The kaolin was used to prepare more than 40 aqueous suspensions, modifying the solids volume fraction between ϕ = 0.20 and ϕ = 0.475 and the dispersant (sodium silicate) content between Xs = 0.075 and Xs = 0.225 mg dispersant/m2 solid. The flow curves of all suspensions were determined in the quasi-steady state. The results confirmed the validity of the model to satisfactorily describe the combined effect of ϕ and XS on the flow curves in the shear-thinning range. [-]
Publicado en
Applied Clay Science (2015), v. 114Derechos de acceso
http://rightsstatements.org/vocab/CNE/1.0/
info:eu-repo/semantics/openAccess
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- QUI_Articles [296]