Buscar
Firing deformation in large size porcelain tiles. Effect of compositional and process variables
(Qualicer, 2018-03-12)
The manufacture of porcelain stoneware has undergone a spectacular
growth in the last years, as a result of the good technical and functional
performance associated to the impervious feature of the sintered product, ...
Improvement of behaviour in the extrusion of low plasticity ceramics
(Qualicer, 2018-02-12)
Shaping by extrusion may be used for the manufacture of tiles, bricks, and also
refractory products. The three fundamental aspects that must be considered to achieve
ideal extrusion conditions are the nature of the ...
Ecological low-cost ceramic membranes based on olive stones as pore former
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-13)
They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes
Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR)
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-10)
The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...
Ink-jet technology applied to engineer low-cost ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.
Desarrollo de membranas cerámicas de bajo coste para diferentes aplicaciones
(Universidad de Salamanca, 2018-07)
Las membranas cerámicas son muy interesantes para diferentes procesos, pero el coste de las membranas comerciales (basadas en materiales como alúmina, circona, titania...), supera en mucho al de las membranas poliméricas. ...
Wastes from industrial processes introduced as chamottes in ceramic membranes
(Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment), 2018-07-09)
In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.
Application of the Service-Learning Methodology to the Development of the End of Degree Project in chemical Engineering
(Servicio Editorial de la Universidad del País Vasco, 2017-07)
This paper aims to demonstrate how the SL methodology can be incorporated into
the development of the End of Degree Project (EDP) in a Bachelor Degree in Chemical
Engineering, allowing the students, while performing the ...
Nuevas aplicaciones de las fritas cerámicas: vidrios bioactivos
(2016)
Companies in the frit, glaze, and ceramic colour producing subsector know a great deal
about the different frit-manufacturing process stages such as raw materials milling and
mixing, as well as fusing the raw materials ...
New creamic tile appplications: development of a photocatalytic reactor for wastewater treatment
(Qualicer, 2016)
La fotocatálisis heterogénea es un proceso de oxidación avanzada que se
basa en la generación de radicales hidroxilo (OH•) por la incidencia de radiación
ultravioleta sobre un fotocatalizador (TiO2). Estos radicales ...