Listar ESID_Congressos i Conferències por título

Mostrando ítems 1-20 de 88

    • openAccess   A New Virtual Reality Interface for Underwater Intervention Missions 

      Cruz, Marcos de la; Casañ, Gustavo Adolfo; Sanz, Pedro J; Marin, Raul Elsevier (2021-04-14)
      Nowadays, most underwater intervention missions are developed through the well-known work-class ROVs (Remote Operated Vehicles), equipped with teleoperated arms under human supervision. Thus, despite the appearance on the ...

    • openAccess   A proposal of an evaluation model under the principles of universal design 

      Gual, Jaume; Lloveras, Joaquim; Puyuelo Cazorla, Marina; Romero, F. Design Society (2010)
      The aim of this work is to try to set out how the Universal Design (UD) paradigm can influence the process of product design and how the models of evaluation should work for products designed for all users. Firstly, we ...

    • openAccess   Actuator Fault Tolerant Control Proposal for PI Controlled SISO Systems 

      Peñarrocha-Alós, Ignacio; Sales-Setién, Ester; Tena, David Elsevier (2018-08-29)
      In this work, we develop a control structure which can be added to an existing closed loop in order to mitigate the effect of actuator faults. We analyze the initial performance of the closed loop in terms of robustness ...

    • openAccess   Adaptación de la docencia por Covid-19: experiencia en la ingeniería automática 

      Miguel-Escrig, Oscar; Díaz-Sanahuja, Carlos; Peñarrocha-Alós, Ignacio; Sanchis LLopis, Roberto Universidade da Coruña, Servizo de Publicacións (2021)
      En este trabajo se describe y analiza la experiencia docente relativa al curso 2020-2021 en la asignatura Sistemas Automáticos. Debido a los efectos de la pandemia, se ha tenido que adaptar la docencia al no disponer de ...

    • closedAccess   Analysis of Origin and Diffusion of the Baroque and its Impact in China 

      Meng, Famwei; Máñez Pitarch, María Jesús; Martínez-Moya, Joaquín A. Universidad Politécnica de Madrid (2021-11-24)
      The baroque style is trending in China because of some resemblance to Chinese design concepts. This work is dedicated to the study of the "Song Pou" building, in the city of Harbin, the study is developing a graphic survey ...

    • openAccess   Analysis of volumetric tactile symbols produced with 3D printing 

      Gual, Jaume; Puyuelo Cazorla, Marina; Lloveras Macià, Joaquim (2012)
      The morphological elements of design used for designing tactile maps and symbols for visually impaired users are points, linear, and areal elements. One of the main characteristics of these elements is their two-dimensional ...

    • openAccess   Antibacterial and osteogenic ­Cu-­doped sol-­gel coatings for Ti implant functionalization 

      Romero-Gavilán, Francisco J; Arias-Mainer, Carlos; Cerqueira, Andreia; García-Arnáez, Iñaki; Scalschi, Loredana; Vicedo, Begonya; Azkargorta, Mikel; Elortza, Felix; Gurruchaga, Mariló; Goñi, Isabel; Suay, Julio Wiley (2023)

    • openAccess   Application of quchane methodology in professional design studios 

      Royo González, Marta; Chulvi, Vicente; Mulet, Elena; Felip, Francisco; Ruiz-Pastor, Laura AEIPRO (2022-07-05)
      As users' lives change, some products cease to be used because they are poorly adapted to new needs. Changing needs are understood as changes in the user's life which mean that the product is no longer useful and the ...

    • openAccess   Applications of impedance spectroscopy in thermoelectricity 

      García-Cañadas, Jorge; Beltrán-Pitarch, Braulio The Abdus Salam International Centre for Theoretical Physics (ICTP) (2019-03-12)
      t is widely used in a lot of different fields (solar cells, fuel cells, corrosion, supercapacitors, batteries, etc.). • Powerful and very reliable equipment are available in the market. • It allows the separation of the ...

    • openAccess   ¿Ayuda un entorno creativo a la adquisición de competencias creativas? 

      Chulvi, Vicente; Royo González, Marta; García-García, Carlos; Felip, Francisco; Gual, Jaume Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO) (2019-07-10)
      Numerous studies have shown that the environment affects creativity. This means that the creativity of an individual can be enhanced by placing him or her in an environment with the appropriate stimuli. However, these ...

    • openAccess   Banks of estimators and decision mechanisms for pitch actuator and sensor FE in wind turbines 

      Sales-Setién, Ester; Peñarrocha-Alós, Ignacio Elsevier (2018-08-29)
      Wind turbines are prone to multiple different faults and input observability conditions are not always guaranteed for these faults. In such cases, it is not possible to build estimators which provide appropriate fault ...

    • openAccess   Comparación de dos diseños de dedo protésico subacutado: tendón vs. sistema articulado 

      Andres-Esperanza, Javier; Pérez-González, Antonio Universidad Miguel Hernández de Elche. Grupo de Ingeniería Mecánica Aplicada (AME) (2016)
      El diseño de las manos protésicas tiende hacia diseños más antropomorfos tratando de mantener la simplicidad en el control. A pesar de que número de grados de libertad de la mano humana es mayor de veinte, estos no son ...

    • openAccess   Comparative study of Sustainability Metrics for Face Milling AISI 1045 in different Machining Centers 

      AYABACA, CESAR; Abellán-Nebot, José V. Elsevier (2020-03-09)
      The objective of this study is to compare a set of sustainability metrics between different manufacturing resources applied to high performances machining centers. The research compares distributed scenarios in order to ...

    • openAccess   Componentes principales aplicados al estudio de la dinámica del pie supinado y normal durante la marcha 

      Sanchis Sales, Enrique; Sancho-Bru, Joaquin L.; Rodríguez Cervantes, Pablo Jesús; Roda-Sales, Alba; Pascual-Huerta, Javier Universidad Miguel Hernández de Elche. Grupo de Ingeniería Mecánica Aplicada (AME) (2016)
      Las variaciones en el índice postural del pie (pronados, supinados) suelen asociarse con una incorrecta función del miembro inferior que lo predispone a lesiones. El análisis riguroso de la dinámica del pie es complejo, ...

    • openAccess   Construction of scale models in industrial design: the irruption of additive manufacturing. Rubrics proposal for an objective evaluation 

      Felip, Francisco; Gual, Jaume International Academy of Technology, Education and Development (IATED) (2019-06-01)
      Recent studies corroborate the progressive implementation of Additive Manufacturing technologies (commonly known as 3D printing) in education, demonstrating several advantages. In the field of industrial design, the ...

    • openAccess   Contribución de la edificación a la sostenibilidad del medio rural 

      Ruá, María José; Huedo, Patricia; Cabeza Gonzalez, Manuel; Sáez Riquelme, Beatriz; Gallego, Teresa Asociación Española de Ciencia Regional (AECR) (2021-11-24)
      La finalidad de este estudio es analizar las características del medio urbano y construido en municipios rurales en riesgo de despoblación, con el fin de confeccionar un modelo sistematizado de diagnóstico a partir del ...

    • openAccess   Control de la tensión del bus de continua de un filtro activo mediante un convertidor DC-DC 

      Moya-López, D.; Alfonso, j. Carlos; Flors-Mas, O.; Ariño Latorre, Carlos Vicente; Martínez-Molina, A.; Beltran, Hector; Pérez, Emilio Publicaciones de Ingeniería, Escuela Técnica Superior de Ingeniería (2015)
      En este artículo se presentan los resultados experimentales obtenidos mediante un sistema compensador generador trabajando de forma aislada de la red eléctrica. Para analizar el funcionamiento del sistema se ha desarrollado ...

    • openAccess   Design and manufacturing workshop using the design thinking methodology 

      Garcia-Broch Martín, Marina; Gual, Jaume International Academy of Technology, Education and Development (IATED) (2019-11-11)
      The purpose of this paper is to describe and discuss the experience under the methodology of Design Thinking, using a workshop format. This workshop, which took place on October 18th and 19th, 2018, in the BUC (Biblioteca ...

    • openAccess   Design of a machine to rectify ceramic tiles for laboratory tests 

      Serrano Mira, Julio; Abellán-Nebot, José V.; Bruscas Bellido, Gracia M. IOP Publishing (2021)
      The tile rectification process, also called squaring, consists of machining the edges of the tile to make them straight, parallel two by two and perpendicular to the other two in addition to controlling the size of the ...

    • openAccess   Determinación paramétrica de los ejes de rotación de las articulaciones interfalángicas de los dedos 

      Jarque-Bou, Néstor J; Sancho-Bru, Joaquin L.; Vergara, Margarita; Pérez-González, Antonio; Roda-Sales, Alba; Mestre Vicent, S. Universidad Miguel Hernández de Elche. Grupo de Ingeniería Mecánica Aplicada (AME) (2016)
      Los ejes de rotación de las articulaciones interfalángicas de los dedos son aproximadamente paralelos a los pliegues de flexión. Sin embargo, los modelos biomecánicos y ergonómicos existentes suelen considerar ejes de ...