Modelización mecánica del enfriamiento rápido en sistemas tipo gres porcelánico
Scholar | Altres documents de l'autor: Dal Bó, Marcelo; Cantavella Soler, Vicente; Sánchez-Vilches, Enrique; Hotza, Dachamir; Boschi, A. O.
MetadadesMostra el registre complet de l'element
TítolModelización mecánica del enfriamiento rápido en sistemas tipo gres porcelánico
Data de publicació2012-03
Versió de l'editorhttp://ceramicayvidrio.revistas.csic.es/index.php/ceramicayvidrio/article/view/1 ...
EditorSociedad Española de Cerámica y Vidrio
This paper analyses the effect of cooling on mechanical behaviour, in particular, on the residual stresses that appear when materials of the porcelain tile type are involved. However, these compositions have a very ... [+]
This paper analyses the effect of cooling on mechanical behaviour, in particular, on the residual stresses that appear when materials of the porcelain tile type are involved. However, these compositions have a very complex microstructure, in which there are several crystalline phases and the glassy phase is not homogeneous. In this study a simpler composition was therefore formulated, using sodium feldspar as starting material to which quartz with different particle sizes was added. A viscoelastic model was used to estimate the residual stresses that develop during cooling. The parameters of the model were obtained either from the literature or were determined in laboratory tests. An assembly was designed that allowed non-contact measurement of the temperature at the top and bottom surfaces of the test pieces during cooling. The test pieces were subjected to different types of cooling and their residual stresses were then determined by the strain relaxation slotting method [-]
Paraules clau / Matèries
Tipus de documentinfo:eu-repo/semantics/article
© Sociedad Española de Cerámica y Vidrio
Apareix a les col.leccions
- QUI_Articles