Improvement of the Electrochemical Behavior of (Sb, Sn, Cu)O Ceramic Electrodes as Electrochemical Advanced Oxidation Anodes
Ver/ Abrir
Impacto
Scholar |
Otros documentos de la autoría: Giner Sanz, Juan José; Sánchez-Rivera, María José; García Gabaldón, Montserrat; Ortega, Emma; Mestre Beltrán, Sergio; Pérez-Herranz, Valentín
Metadatos
Mostrar el registro completo del ítemcomunitat-uji-handle:10234/9
comunitat-uji-handle2:10234/7033
comunitat-uji-handle3:10234/8618
comunitat-uji-handle4:
INVESTIGACIONMetadatos
Título
Improvement of the Electrochemical Behavior of (Sb, Sn, Cu)O Ceramic Electrodes as Electrochemical Advanced Oxidation AnodesAutoría
Fecha de publicación
2019-05-02Editor
WileyISSN
2196-0216Cita bibliográfica
GINER‐SANZ, Juan J., et al. Improvement of the electrochemical behavior of (Sb, Sn, Cu) O ceramic electrodes as electrochemical advanced oxidation anodes. ChemElectroChem, 2019, vol. 6, no 9, p. 2430-2437Tipo de documento
info:eu-repo/semantics/articleVersión de la editorial
https://onlinelibrary.wiley.com/doi/full/10.1002/celc.201801766Versión
info:eu-repo/semantics/submittedVersionPalabras clave / Materias
Resumen
This work explores the possibility of increasing the active surface of a Sb‐doped SnO2 ceramic electrode using CuO as sintering aid, by incorporating petroleum coke as a pore generator. In order to fulfil this goal, ... [+]
This work explores the possibility of increasing the active surface of a Sb‐doped SnO2 ceramic electrode using CuO as sintering aid, by incorporating petroleum coke as a pore generator. In order to fulfil this goal, three series of (Sb, Sn, Cu)O electrodes with different coke contents were synthetized. The properties of the electrodes, and their microstructure, change significantly as a function of the coke content before sintering. The electrochemical characterization of the synthesized electrodes showed that the coke addition before sintering causes two antagonist effects on the performance of the (Sn, Sb, Cu)O as anodes in electrochemical advanced oxidation processes (EAOP). On one hand, it significantly improves the electrochemical roughness factor of the electrode, solving the densification problem in this way. On the other hand, it worsens the electrochemical behavior of the electrode: narrowing its electrochemical window; and “activating” it slightly. The addition of coke before sintering changes the kinetic parameters, leading to a kinetic situation in which the accumulation of hydroxyl radicals is slightly lower. A balance must be sought: an intermediate coke content will improve significantly the electrochemical roughness factor of the electrode, but will only worsen slightly its electrochemical behavior, leading to an optimum (Sn, Sb, Cu)O EAOP anode. [-]
Descripción
"This is the pre-peer reviewed version of the following article: Improvement of the Electrochemical Behavior of (Sb, Sn, Cu)O Ceramic Electrodes as Electrochemical Advanced Oxidation Anodes, which has been published ... [+]
"This is the pre-peer reviewed version of the following article: Improvement of the Electrochemical Behavior of (Sb, Sn, Cu)O Ceramic Electrodes as Electrochemical Advanced Oxidation Anodes, which has been published in final form at https://doi.org/10.1002/celc.201801766. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. [-]
Publicado en
ChemElectroChem, 2019, vol. 6, no 9Derechos de acceso
Copyright © John Wiley & Sons, Inc.
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
http://rightsstatements.org/vocab/InC/1.0/
info:eu-repo/semantics/openAccess
Aparece en las colecciones
- QUI_Articles [296]