Listar Institut Universitari de Tecnologia Ceràmica "Agustín Escardino" (ITC) por fecha de publicación

Mostrando ítems 1-20 de 89

    • openAccess   Análisis de ciclo de vida y reglas de categoría de producto en la construcción. El caso de las baldosas cerámicas 

      Benveniste, Gabriela; Gazulla, Cristina; Fullana-i-Palmer, Pere; Celades López, Irina; Ros Dosdá, Teresa; Zaera, Victoria; Godes, B. CSIC (2011-06-30)
      El presente trabajo muestra la evolución de las actividades de Análisis de Ciclo de Vida (ACV) y redacción de las Reglas de Categoría de Producto (RCP) en el sector de la construcción, más concretamente para los recubrimientos ...

    • openAccess   Estimación de la huella hídrica de baldosas de gres porcelánico esmaltado 

      Ros Dosdá, Teresa; Monferrer, A.; Celades López, Irina; Monfort, Eliseo Sociedad Española de Cerámica y Vidrio (2013)
      En este trabajo se presenta un primer estudio de la estimación de la huella hídrica de las baldosas de gres porcelánico esmaltado, realizado a partir de datos sectoriales, es decir, no es un estudio específico de ninguna ...

    • openAccess   Strategic environmental communication tools 

      Ros Dosdá, Teresa; Celades López, Irina; Sanfélix Forner, Vicenta; Gomar Peiró, Salvador; Monfort, Eliseo Qualicer (2014)
      The Instituto de Tecnología Cerámica (ITC), pursuing its programme of actions aimed at transferring knowledge to the ceramic industry, presents the following work to facilitate the entry of ceramic coverings to markets ...

    • openAccess   Electromagnetic properties of ferrite tile absorber as a function of compaction pressure 

      Clausell-Terol, Carolina; Barba-Juan, Antonio; Nuño, Luis; Jarque, Juan Carlos Elsevier (2016-07-06)
      In this study, the influence of compaction pressure on the electromagnetic properties of Cu-doped NiZn ferrites was investigated. The evolution of the imaginary part – μ″ of the complex magnetic permeability was analysed ...

    • openAccess   Characterization of thermal barriers coatings of Y-TZP/AL2O3/SiC composite obtained by suspension plasma spraying 

      Carnicer Cervera, Víctor; Cañas Recacha, Eugeni; Orts Tarí, María José; Moreno, R.; Salvador Moya, María Dolores; Carpio Cobo, Pablo; Navarro, Lucia; Sánchez-Vilches, Enrique Akadémiai Kiadó (2017-07-09)
      The aim of this work is to improve TBCs providing a self-healing ability. For that purpose, an aqueous suspension of SiCY-TZP and Al2O3 was prepared and deposited by suspension plasma spraying to avoid the oxidation of ...

    • openAccess   Adhesion assessment of bioactive coatings deposited by atmospheric plasma spraying 

      Cañas Recacha, Eugeni; Vicent Cabedo, Mónica; Orts Tarí, María José; Sánchez-Vilches, Enrique Akadémiai Kiadó (2017-07-09)
      The aim of the present work is to prepare bioactive coatings by APS employing different spraying parameters and substrates in order to model the adhesion of the coatings and to determine the best parameters that allow to ...

    • openAccess   Toughening of Nb2O5 doped zirconia biomaterial fabricated by microwave sintering technology 

      Borrell, A.; Salvador Moya, María Dolores; Gil-Flores, Lorena; Peñaranda, Felipe L.; Cañas Recacha, Eugeni; Gutiérrez, Carlos F. Hellenic Metallurgical Society (2017-09-17)
      The aim of this research is to investigate the characteristics and mechanical properties of Nb2O5 doped zirconia. Samples of partially stabilized-zirconia (3Y-TZP) with Nb2O5 in amounts of 0.15-1.5 ...

    • openAccess   Effect of secondary thermal treatment on crystallinity of spinel-type Co(Cr, Al)2O4 pigments synthesized by solution combustion route 

      Gilabert, Jessica; Gómez-Tena, Maria Pilar; Sanz-Solana, Vicente; Mestre Beltrán, Sergio Elsevier (2018-03)
      The effect of a post-synthesis thermal treatment on CoCr2−2ΨAl2ΨO4 (0.0 ≤ Ψ ≤ 1.0) ceramic pigments synthesized by Solution Combustion Synthesis (SCS) has been studied. As-synthesized SCS pigments were treated at two ...

    • openAccess   How can the European ceramic tile industry meet the EU's low-carbon targets? A life cycle perspective 

      Ros Dosdá, Teresa; Fullana-i-Palmer, Pere; Mezquita, Ana; Masoni, Paolo; Monfort, Eliseo Elsevier (2018-07)
      Ceramic tile manufacturing is deemed to be an energy intensive industry, mainly based on combustion processes and, therefore, subject to European policies aiming at reducing greenhouse gas emissions. The “Roadmap for moving ...

    • openAccess   Wastes from industrial processes introduced as chamottes in ceramic membranes 

      Lorente Ayza, Maria Magdalena; Bordes, M. Carmen; Sales Pla, Sonia; Sánchez-Vilches, Enrique; Ugarte, P.; Ramo, A.; Menéndez, M.; Peña, J. A.; Zuriaga Agustí, E.; Santateresa, E.; Gosalbo Nebot, Ana; Rubert, J.; Sos, O.; Basiero, José Antonio Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-09)
      In the present work, chamottes generated as subproducts by different industrial processes have been used to obtain low-cost ceramic membranes.

    • openAccess   Ink-jet technology applied to engineer low-cost ceramic membranes 

      Palacios Tejero, Maria Dolores; Orts Tarí, María José; Sánchez-Vilches, Enrique; Mestre Beltrán, Sergio Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-09)
      This contribution analyses the suitability of the ceramic ink-jet technology to apply layers over a porous ceramic support, as the basis for a development of a standardized method to synthesize multilayer ceramic membranes.

    • openAccess   Eco-friendly ceramic membranes for water reuse in a membrane bioreactor (MBR) 

      Zuriaga Agustí, E.; Pastor, I.; Hernández, Borja; Galián, M.; Lorente Ayza, Maria Magdalena; Bordes, M. Carmen; Sánchez-Vilches, Enrique; Abellán, M.; Simón, P. Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-10)
      The main objective of this study is to develop and validate ceramic membranes at lower cost than the commercial ones, by including agricultural and industrial wastes in the composition, together with raw materials typically ...

    • openAccess   Nanofriltration treatment for boron removal from ceramic industry wastewater 

      Moliner Salvador, R.; Sánchez-Vilches, Enrique; Celades López, Irina; Deratani, A.; Palmeri, J. Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-11)
      Water is a limited natural resource and in many regions of the planet, it is also scarce. Consequently, water management has become a very important issue in many traditional industrial sectors which are water consumers ...

    • openAccess   Ecological low-cost ceramic membranes based on olive stones as pore former 

      Sánchez-Vilches, Enrique; Lorente Ayza, Maria Magdalena; Bordes, M. Carmen; Sales, S.; Zuriaga Agustí, E.; Pastor, I.; Hernández, Borja; Galián, M.; Abellán, M. Universitat Politècnica de València. Research Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM). Prometeo Research Group (Membrane Processes and Environmental Effluent Treatment) (2018-07-13)
      They will address the obtained results so far regarding the manufacturing and validation of the REMEB ceramic membranes

    • openAccess   Environmental profile of Spanish porcelain stoneware tiles 

      Ros Dosdá, Teresa; Celades López, Irina; Monfort, Eliseo; Fullana-i-Palmer, Pere Springer (2018-08)
      Purpose Porcelain stoneware tile (PST) iscurrently the ceram- ic tile of greatest commercial and innovation interest. An envi- ronmental life cycle assessment of different varieties of PST was undertaken to enable ...

    • openAccess   Microstructure assessment of suspension plasma spraying coatings from multicomponent submicronic Y-TZP/Al2O3/SiC particles 

      Carnicer Cervera, Víctor; Orts Tarí, María José; Moreno, Rodrigo; Sánchez-Vilches, Enrique Elsevier (2018-08-01)
      In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of a multicomponent mixture made up of an Y-TZP/Al2O3 matrix with SiC particles. Two suspensions of Y-TZP and Al2O3 with ...

    • openAccess   Revisiting pyroplastic deformation. Application for porcelain stoneware tile bodies 

      Sánchez-Vilches, Enrique; Sanz-Solana, Vicente; Cañas Recacha, Eugeni; Sales Gil, Juan; Kayaci, Kagan; Taskiran, Ugur; Anil, Ümit; Türk, Senay Elsevier (2018-09-21)
      In this research an analysis of firing deformation tendency in porcelain stoneware tile compositions was carried out based on pyroplastic deformation measurements. The effect of the amount and nature of some fluxing additives ...

    • openAccess   Tile decoration with greener technologies: spray pyrolysis and solution combustion synthesis for alternative colorations 

      Palacios Tejero, Maria Dolores; Fernández-Zapata, J. L.; Raro Clemente, Ivan; Mestre Beltrán, Sergio Universitat Politècnica de Catalunya- BarcelonaTECH. (2018-10)
      The great concern about environmental impacts of different industries if forcing the research in more nature-friendly processes. In the case of ceramic tiles manufacture, decoration stage consumes pigments or frits for ...

    • openAccess   Nanoparticle formation and emission during laser ablation of ceramic tiles 

      Salmatonidis, Apostolos; Viana, Mar; Pérez, Noemí; Alastuey, Andres; De la Fuente, Germán F.; Angurel Lambán, Luis Alberto; Sanfélix Forner, Vicenta; Monfort, Eliseo Elsevier (2018-12)
      Pulsed laser ablation (PLA) is a widely used technology, for surface structuring and tile decoration in the ceramic industry. During PLA, nanoparticles (NP <100 nm) are unintentionally released and may impact exposure. ...

    • openAccess   CuO improved (Sn,Sb)O2 ceramic anodes for electrochemical advanced oxidation processes 

      Sánchez-Rivera, María José; Giner Sanz, Juan José; Pérez-Herranz, Valentín; Mestre Beltrán, Sergio American Ceramic Society (2018-12)
      Antimony‐doped tin oxide electrodes with CuO as sintering aid are presented as an economical alternative to metal‐based electrodes, intended for the electrooxidation process of emerging and recalcitrant organic contaminants ...